MULTI-COMPONENT MEASUREMENT TECHNOLOGY FOR FORCES AND MOMENTS |
|---|
| Thomas Allgeier, Helmut Gassmann, Ulrich Kolwinski, Peter Giesecke |
- Abstract:
- This paper introduces the requirements and possibilities of simultaneous force and moment measurements in industrial testing. Apart from describing the principal mechanics of force and moment vectors, important implications of ignoring disturbing components are mentioned. This is followed by an overview of practical applications of multicomponent measurements. The main part of the paper describes a new measurement tool for the data acquisition, evaluation and vector analysis. This comprises issues of transducer selection and applicability, details of the electronics used and also addresses the software design. Examples of typical applications of the entire system are given with an emphasis on outlining the mode of operation and ease of adaptation to new problems. Finally, the principles of system calibrations are described.
- Download:
- IMEKO-TC3-2002-026.pdf
- DOI:
- -
- Event details
- IMEKO TC:
- TC3
- Event name:
- Joint International Conference on Force, Mass, Torque, Hardness and Civil Engineering Metrology in the age of globalization
- Title:
18th Conference on Force, Mass and Torque (together with 8th HARDMEKO TC5 Conference on Hardness Measurement and 1st TC20 Conference on Civil Engineering Metrology)
- Place:
- Celle, GERMANY
- Time:
- 24 September 2002 - 26 September 2002