## AMCTM X

**F. Pavese, W Bremser, A Chunovkina, N Fischer, A B Forbes (Eds.): "Advanced Mathematical and Computational Tools in Metrology and Testing X”, vol. 10, Series on Advances in Mathematics for Applied Sciences, vol. 86, World Scientific, Singapore, 2015ISBN: 978-981-4678-61-2, ISBN: 978-981-4678-62-9 (ebook).**

### Table of Contents

Foreword | |

Fostering diversity of thinking in measurement scienceF. Pavese, P. De Bièvre |
1 |

Polynomial calibration functions revisited: numerical and statistical issuesM. G. Cox, P. Harris |
9 |

Empirical functions with pre-assigned correlation behaviour A.B. Forbes |
17 |

Models and methods of dynamic measurements: results presented by St. Petersburg MetrologistsV. A. Granovskii |
29 |

Interval computations and interval-related statistical techniques: tools for estimating uncertainty of the results of data processing and indirect measurementsV. Ya. Kreinovich |
38 |

Classification, modeling and quantification of human errors in chemical analysisI. Kuselman |
50 |

Application of Nonparametric Goodness-of-Fit Tests: Problems and SolutionB. Yu. Lemeshko |
54 |

Dynamic measurements based on automatic control theory approachA. L. Shestakov |
66 |

Models for apparently inconsistent dataR. Willink |
78 |

Model for emotion measurements in acoustic signals and its analysisY. Baksheeva, K. Sapozhnikova, R. Taymanov |
90 |

Uncertainty calculation in gravimetric microflow measurementsE. Batista, N. Almeida, I. Godinho, E. Filipe |
98 |

Uncertainties propagation from published experimental data to uncertainties of model parameters adjusted by the least squaresV. I. Belousov, V. V. Ezhela, Y. V. Kuyanov, S. B. Lugovsky, K. S. Lugovsky, N. P. Tkachenko |
105 |

A new approach for the mathematical alignment machine tool-paths on a five-axes machine and its effect on surface roughnessS. Boukebbab, J. Chaves–Jacob, J.-M Linares, N. Azzam |
116 |

Goodness-of-fit tests for current status dataE. V. Chimitova, N. Balakrishnan |
124 |

Calculation of coverage intervals: some study casesA. Chunovkina, N. Burmistrova, A. Stepanov |
132 |

Application of numerical methods in metrology of electromagnetic quantitiesM. Cundeva-Blajer |
140 |

Calibration method of measuring instruments in operating conditionsA. A. Danilov, Yu. V. Kucherenko, M. V. Berzhinskaya, N. P. Ordinartseva |
149 |

Statistical methods for conformity assessment when dealing with computationally expensive systems: application to a reengineering case studyS. Demeyer, N. Fischer, F. Didieux, M. Bivacchi |
156 |

Overview of EMRP Joint Reserch Project NEW06 "Traceability for computationally-intensive metrology"A. B. Forbes, I. M. Smith, F. Härtig, K. Wendt |
164 |

Stable units of account for economic value correct measuringN. Hovanov |
171 |

A novel approach for uncertainty evaluation using characteristic function theoryA. B. Ionov, N. S. Chernysheva, B. P. Ionov |
179 |

Estimation of test uncertainty for TraCim reference pairsF. Keller, K. Wendt, F. Härtig |
187 |

Approaches for assigning numerical uncertainty to reference data pairs for software validationG. J. P. Kok, I. M. Smith |
195 |

Uncertainty evaluation for a computationally expensive model of sonic nozzeG. J. P. Kok, N. Pelevic |
203 |

EllipseFit4HC: MATLAB algorithm for demodulation and uncertainty evaluation of the quadrature homodyne interferometer signalsR. Köning, G. Wimmer, V. Witkovsky |
211 |

Considerations on the influente of test equipment instability and calibration methods on measurement uncertainty of laboratory testsA. S. Krivov, S. V. Marinko, I. G. Boyko |
219 |

A Cartesian method to improve the results and save computation time in Bayesian signal analysisG. A. Kyriazis |
229 |

Determining the reliability of identification of complex organic compounds using HPLC and base chromatographic and spectral dataYu. A. Kudeyarov, E. V. Kulyabina |
241 |

Uncertainty evaluation of fluid dynamic simulation with one-dimensional riser model by means of stochastic differential equationsE. A. O. Lima, S. B. Melo, C. C. Dantas, F. A. S. Teles, S. Soares Bandiera |
247 |

Method to estimate the uncertainties of ISO specificationsJ.-M. Linares, J.M. Sprauel |
252 |

Adding a virtual layer in a sensor network to improve measurement ReliabilityU. Maniscalco, R. Rizzo |
260 |

Calibration analysis of a computational optical system applied in the dimensional monitoring of a suspension bridgeL. L. Martins, J. M. Rebordão, A. S. Ribeiro |
265 |

Determination of numerical uncertainty for numerical artefacts for validating coordinate metrology softwareH. D. Minh, I. M. Smith, A. B. Forbes |
273 |

Least-squares method and Type B evaluation of standard uncertaintyR. Palenčár, S. Ďuriš, , P. Pavlásek, M. Dovica, S. Slosarcik, G. Wimmer |
279 |

Optimising measurement processes using automated planningS. Parkinson, A. Crampton, A. P. Longstaff |
285 |

Software tool for conversion of historical temperature scalesP. Pavlasek, S. Duris, R. Palencar, P. Pavlasek, A. Merlone |
293 |

Few measurements, non-normality: a statement on the expanded uncertaintyJ. Petry, B. De Boeck, M. Dobre, A. Peruzzi |
301 |

Statistical issues in accelerometer sensitivityA. L. Rukhin, D. J. Evans |
310 |

Metrological aspects of stopping iterative procedures in inverse problems for static-mode measurementsK. K. Semenov |
320 |

Inverse problems in theory and practice of measurements and metrologyK. K. Semenov, G. N. Solopchenko, V. Ya. Kreinovich |
330 |

Fuzzy intervals as foundation of metrological support for computations with inaccurate dataK. K. Semenov, G. N. Solopchenko, V. Ya. Kreinovich |
340 |

Testing statistical hypotheses for generalized semiparametric proportional hazards models with cross-effect of survival functionsM. A. Semenova , E. V. Chimitova |
350 |

Novel KCRV and DOE determination by the model selection and posterior predictive checkingK. Shirono, H. Tanaka, M. Shiro , K. Ehara |
358 |

Certification of algorithms for constructing calibration curves of measurement instrumentsT. Siraya |
368 |

Information Function of the Heart: Discrete and Fuzzy Encoding of the ECG-Signal for Multidisease Diagnostic SystemV. Uspenskiy, K. Vorontsov, V. Tselykh, V. Bunakov |
377 |

Application of two robust methods on the example of inter-laboratory comparisonЕ. T. Volodarsky, Z. L. Warsza |
385 |

Validation of CMM evaluation software using TraCIMK. Wendt, M. Franke, F. Härtig |
392 |

Semi-parametric polynomial method for retrospective estimation of the change-point of parameters of non-Gaussian sequencesS.V. Zabolotnii, Z.L. Warsza |
400 |

Use of a Bayesian approach to improve uncertainty of model-based measurements by hybrid multi-tool metrologyNien-Fan Zhang, R. M. Silver, Hui Zhou, B. Barnes |
409 |

Application of effective number of observations and effective degree of freedom for analysis of autocorrelated observationsA. Zieba |
417 |

Authors Index | 425 |

Keywords Index | 427 |